September 28, 2020
Freezers - a Cold But a Useful World
One may wonder as to what is a freezer. To put it a simple way, the freezer is an appliance which sheds out the external heat in the environment. Many things can be classified in this category. However for any cooling mechanism to be deemed as a freezer it has to have the capability to keep the inside temperature of refrigeration equipment manufacturers its frame just below freezing point. The preferable temperature band is 0 pF or -18 pC and the contents inside the freezer are supposed to be frozen.
The domestic freezer or the refrigerator is the most known appliance to humans today and is being used all over the world in a majority of households. This is an appliance which has a separate compartment for keeping the consumable items for cooling as well as freezing. These have their own cooling mechanisms which use mainly Freon Gas for cooling.
The early years of Freezers had many companies making all kinds of freezers. Then the gas that was being used was the toxic ammonia gas. The replacement with the Freon Gas saw these wonderful freezers enter the domestic market and the refrigerator became a regular household commodity.
The early freezer had very few specialities. They served the basic purpose of cooling and preventing edible items from getting fungus etc. Now-a-days there are many new technologies which have been incorporated in the freezer and so there are now freezers that have come out with facilities like automatic defrosting and cooling and setting different temperatures. Features like the freezer adjusting the temperature by itself as per the heat outside are now a common feature and most of the freezers have this feature.
The market has seen major players churning out high quality and technically advanced freezers today. However, the consumer looks for a defined set of factors when purchasing a freezer. Although the criteria depends upon the customer himself and a defined set of factors is not possible to establish, still there are many things that a customer should look out for when buying a freezer. The most obvious consideration should be the space available in the freezer. A large size means a greater ability to store food. This capacity is usually indicated in litres. However, this should not mean that that the overall freezer should occupy a lot of space. Hence families should go for upright freezers which occupy the minimum of space.
The next consideration should be the assortment of the cabinets inside the freezer. They should be arranged in such a manner that any type of items can be stored in it. Hence the freezer should contain proper racks for storing bottles and there should be separate freezing compartments which should be used to keep items which should be stored at temperatures below freezing point.
The market of freezers is a pool of technologies with a number of companies offering many types of technologies. These technologies get themselves known by making the refrigerators famous in which they are involved and thereby increasing the sales of the company.
Industrially, however the scenario is totally different. Here freezers are huge in size and have a large storage capacity. These are mainly chest freezers, lab freezers as well as 'explosion proof' freezers. These are mainly used for a variety of commercial and industrial purposes. Industrial freezers are mainly prevalent in the process of cold storage in industries like fishing etc.
Posted by: refrigerations at
03:09 AM
| No Comments
| Add Comment
Post contains 576 words, total size 4 kb.
September 15, 2020
Cold Storage Warehouse Techniques That Are Cost Effective and Value Added For You
Cold storage warehouse techniques provide a "one stop shop" for all your cold storage services. Their exporting services, for example, can get your product to the corner supermarket or across the ocean with ease. Some include patented quick freezing systems, which are capable of refrigeration unit reducing your products freezing and tempering times by as much as 350%, customized spacer processes, specially built pallet machines and exporting services.
Often times inefficiencies in the cold storage warehouse process can lead to problems for you. If a process is too inefficient in the freezing and thawing stage, the product might not be ready in time for delivery. That is why you should choose a company that will get your product ready for distribution in the most efficient amount of time possible. For example, a spacer insert and removal process is quite often used to minimize the time it takes to freeze your products. For meat customers, this process helps spread your meat product (hams for example) from bins onto spacers to achieve faster freezing times.
Custom-made pallet tipping machines offer additional value added services to you. It is known that the old way of manually restocking pallets was a waste of time, the creation of custom-made pallet tipping machines eliminate the problem. For example, these custom made pallet tipping machines can invert pallets that weigh up to 2,800 pounds. Once this is done, the product can be set down with ease and then stretch wrapped, placed into storage, or shipped out the door.
Harold Sterling has many hobbies. One of which includes the need of a warehouse to store frozen and refrigerated goods. He liked to hunt and needs a good, safe place to keep all of his meat for when he needs it. He chooses a cold storage warehouse to provide him with everything he needs for his storage needs.
Posted by: refrigerations at
02:51 AM
| No Comments
| Add Comment
Post contains 322 words, total size 2 kb.
August 27, 2020
Cold Storage on a Mega Scale
The refrigeration of certain perishable products is big business these days. Cold storage is now in demand on a grand scale by the food, pharmaceutical and many other commercial industries. These refrigerated units can range from small fridges to mega cold stores with rooms for hundreds of pallets of produce. Some cold storage units are even the size of cold storage supplier industrial shipping containers and house several storage rooms.
In the food industry for instance, meat suppliers and butchers need to be able to freeze and store large quantities of meat. The worldwide consumption of meat has put a demand on the producers to supply high volume orders to supermarkets and shops. This is where large-scale cold storage containers become essential. Producers and suppliers can either hire or buy these storage units to contain all their produce in one safe, temperature controlled place.
In the pharmaceutical industry, there is a need for certain vaccines, medicines and diagnostic kits to be refrigerated in order to preserve their properties and give them a longer shelf life. Cold storage containers can keep these items at specific temperatures until they are ready to be used by a medical practitioner or patient. There are a huge variety of temperature controlled units available featuring the latest equipment to ensure your product is kept at the correct temperature.
For instance, a pharmaceutical cold storage unit can contain features including dual electronic temperature control recorders, sight and sound alarm systems and weather-proofing. All of these elements ensure that the contents is kept safe and at optimum condition in a carefully climate controlled environment.
Many cold storage units can be sited inside or outside, thereby freeing up essential internal building space. In some instances, these type of units do note require planning permission so can be set up outside a factory or producers premises for convenience.
Because these containers are often hired if and when required, many are fully portable. This means they can be shipped around the world. Even large pharmaceutical containers and blast freezers can be bought by a far away country and shipped in.
On a smaller scale, certain refrigerated units are designed to go on the road. For instance in the food and entertainment industry, where portable cold storage equipment is essential for say catering use at events, units can be delivered easily by trailer and used on site. Mobile bars are another type of refrigerated unit that is also often used at events.
So, in terms of cold storage, there is something available for all refrigeration needs. Large climate controlled containers are used widely by many industries and the technology is now there to offer ever-increasing capacities and capabilities. Whatever the scale however, it is the modern features and portability that are key to the success of the commercial refrigeration sector.
Posted by: refrigerations at
03:02 AM
| No Comments
| Add Comment
Post contains 474 words, total size 3 kb.
August 20, 2020
Types of Refrigerators
Are you looking to buy a new refrigeratorcold storage supplier but are unsure of what kind is best for your kitchen? If so, you have come to the right place. Choosing the right refrigerator is a huge decision as it can make an extreme difference in your home. Like any new home addition, picking out a new refrigerator can be very exciting. However, it can also be very time consuming and confusing. Refrigerators come in all styles, brands, and materials, making choosing the best one more difficult than it may at first seem. This article will compare the four different types of refrigerators (top mount freezer refrigerators, side by side refrigerators, freezer on bottom refrigerators, and French door refrigerators) to help you make a more informed decision and make the right choice for you and your family.
As most of us already know, a refrigerator is an essential appliance to have in any home. They are forms of storage that allow us to store and protect our food from bacterial growth and spoilage. Usually, it comes with a freezer attached. The main difference between a refrigerator and a freezer is that a refrigerator maintains a temperature above zero and a freezer maintains a temperature below zero, keeping your foods much colder. The different types are classified by where the freezer is located on the fridge. For example, a top mount refrigerator is called so because the freezer is located above the refrigerator. Similarly, the bottom mount refrigerator has the freezer located below.
The top mount refrigerator is the most commonly bought type of fridge. This is because, in general, it is the least expensive type of refrigerator to buy and it does not require much maintenance or repair. Top mount refrigerators are excellent for storage space as they have wide shelves and a lot of door shelves for drinks and condiments. Not only does the top mount refrigerator offer more fridge space than other models but it also offers more freezer space as well.
Opposite of the top mount refrigerator is the bottom mount refrigerator where the freezer is located underneath the fridge. These are great for people who like their food at eye and hand level. This style of fridge is often a good fit for the elderly or for anyone who may have difficulty bending because all components can be reached without bending down.
Also great for people who like their food at hand/eye level is the side by side refrigerator. These refrigerators are often more expensive than other types but offer both the refrigerator and freezer beside one another, both at eye/hand level. This type of refrigerator also has more advanced features, such as the ice and water dispenser, as well. This refrigerator is a great choice for many, however, there is one downfall. These refrigerators are not for those individuals who have smaller kitchen space as both doors need to have room to open.
Based on the concepts of the side by side and the bottom mount refrigerators is the French door refrigerator. These refrigerators have a freezer located underneath the fridge and, like the side by side refrigerators, they have two doors opening in opposite directions for the fridge. These refrigerators are becoming an increasingly popular choice as they are one of the most spacious of all the refrigerator types.
A refrigerator is an appliance that most people have in their homes for many years without purchasing a new one. Therefore, whatever choice you make for your refrigerator, make sure it is one that you will be happy with for years to come. When choosing a refrigerator do not make any rush decisions and always make sure to look around in different stores to assure that you get the best deal possible!
Posted by: refrigerations at
03:14 AM
| No Comments
| Add Comment
Post contains 630 words, total size 4 kb.
August 12, 2020
Downside to Used Commercial Refrigeration Equipment
OK so your old refrigeration unit has just packed in. You need to replace it and get it replaced fast so you don't lose business. Do you risk it and buy that old refurbished refrigeration unit or do you buy new commercial refrigeration equipment?
Yes a used unit may cost under less than half price yes but... on the other hand it will also last for less then half the time (in most case). We always recommend our customers to buy new refrigeration equipment and any other type of catering equipment as you have a warranty with all electrical goods and you can be sure that they will not stop working within the next month.
Used Refrigeration Equipment: refrigeration unit
The biggest problem with buying a used refrigeration unit is that you can not see the main parts you need to check are still in top working condition, yes the outside of the used unit may look like its been well refurbished and it may look like new, but that's not all you need to know about the refrigeration unit. You have no way of telling if the units compressor has 2 years or 2 months life left in it, the refrigerators circuit and electrics could all be shot and you will not know until you start to use it and it goes on you. You have no way to tell any of this.
Now we have a list of the main faults people have with used refrigeration equipment:
Fault 1 -The units compressor overheats due to the condenser not been kept clean. The oil starts to break down. This means the oil will be damaged and might lead to break downs in the future. Even if the condenser is kept clean you may still have problems, because if the compressor continually overheats it will break and fail.
Fault 2 - Running a unit whilst the evaporator is frozen. This could be down to a number of reasons such as a poorly running fan, defrost component or even the thermostat. If this happens the refrigerant liquid will flood back into the compressor, in turn this Will foam up the oil if not stopped. If this goes on to long your compressor will break as the motor will be running without lubricant and that will be the cause of its damage.
Fault 3 - A flooded start, which is when the refrigeration liquid explodes violently as it starts damaging the compressor in more then one way. This can happen because the refrigeration unit drops below 50 degrees Fahrenheit, which allows the refrigerant vapor to migrate out its place to the compressor when in its off cycles. Once this happens the vapor starts to condense into liquid causing it to explode once it starts again.
The above are just three of many ways in which used refrigeration equipment could fail and break down on you. You have no way to tell whats internally wrong with a used bit of equipment like this and so you should not take the risk of buying used refrigeration equipment that you don't know the true condition of.
If you are still interested in buying used refrigeration equipment please take note of this next top tip!
Before you even look into the used equipment please please have a second look around at new catering equipment, even the older models. Take into consideration the money you could be saving on repairs when you buy a new bit of refrigeration equipment, especially when its still under warranty. Even after your warranty period your refrigeration equipment should not need many repairs as in most cases repair work is not need until the last couple of years of the equipments life.
Posted by: refrigerations at
05:48 AM
| No Comments
| Add Comment
Post contains 626 words, total size 4 kb.
August 05, 2020
Important Aspects to Consider - Cold Storage Warehouse Capabilities
There are many aspects to consider when deciding on a cold room storage for your storage solution. For one, you need a customized solution that will meet your special requirements. For example, you may have product that needs frozen and stored in a specific amount of time. Consider this question, "how long does the process from start to finish take?" because this is an important concern. The warehouse should be able to provide a complete timetable to you and even give you numbers on how much time it takes to thaw the product. After all, the thawing process is just as important as the storing process! A cold storage warehouse might take weeks (or even months) to thaw your product (depending on the qualities of the product) that is why is important to consider the time from start to finish. If the cold storage warehouse only takes a couple days to thaw your product, then it is even more valuable to you.
Also, consider how complete of a solution you are getting. Research and ask questions like, "are the services door-to-door?" and "are your facilities fully racked with quick freezing capability?" What you need from a cold storage warehouse is a comprehensive array of services. You do not want to select a facility that does not meet your requirements, because you will end up with the wrong service. In addition, you want to consider the location of your facilities relative to the location of the cold storage warehouse. Is the facility close to your facility and/or offer an array of distribution solutions? Is the facility a full-service distribution warehouse, which has an expanded distribution network, locally and regionally? If the cold storage warehouse meets your objectives then it should be a great place to store your cold product.
Therefore, you should consider the technology behind their refrigeration units. Are they using older antiquated equipment that might fail and/or leave you worrying? On the other hand, do they use modern ammonia refrigeration systems that are capable of storing your product to (minus) -20 degrees Fahrenheit? Finally, a cold storage warehouse should have quick freezing facilities that will quickly store and freeze your product.
Harold Sterling has many hobbies. One of which includes the need of a warehouse to store frozen and refrigerated goods. He liked to hunt and needs a good, safe place to keep all of his meat for when he needs it. He chooses a cold storage company to provide him with everything he needs for his storage needs.
Posted by: refrigerations at
01:46 AM
| No Comments
| Add Comment
Post contains 429 words, total size 3 kb.
July 27, 2020
Allowing an inexperienced mechanic or technician to service
BMW's are truly special cars and the individuals who own them are very particular. Allowing an inexperienced mechanic or technician to service a Beemer can do more harm than good. Although well-intentioned, this novice may not be educated in the intricacies of some foreign engines and in particular BMW automotive repair. Indeed, a car repair shop may advertise that it services foreign cars, but it is wise to ask about the education and experience of the individual who is to service your BMW.
For generations men (and women) have worked on their American cars in their driveways on the weekends. A BMW is not a do-it-yourself type of project. If all you refrigeration equipments manufacturers need is a scheduled or half-interval oil service, the details are not the same as on a Ford pick-up or Chevy Impala. A qualified BMW automotive repair specialist will know the difference.
So many owners have taken their cars into repair shops only to be told 'it could be this' or 'it could be that.' Hundreds or thousands of dollars later the auto is not repaired and it turns out that the initial work was not needed because it was something as simple as a sensor. When you take your car to a BMW automotive repair specialist, the shop will have special diagnostics and computers that are made exclusively for these models.
Once hooked up to your system the exact problem is pinpointed. There is no guesswork.
Just imagine the expense if a well-meaning technician told you that you needed a new transmission and your BMW warranty had expired. If you are not at a specialized BMW auto repair shop, thank the technician and tell him you will think about it. Like going to the doctor's office and he suggests you have your gall bladder removed, you want a second opinion.
Take it to a shop that specializes in BMW's and let them tell you what the problem is. It could be that you do not need a new transmission at all; you just need to replace a sensor or part. But if it turns out you do need to replace the transmission, you will be assured that the BMW automotive repair specialist will have gone through extensive education and training and your repair will be the quality you need.
Posted by: refrigerations at
05:32 AM
| No Comments
| Add Comment
Post contains 393 words, total size 2 kb.
July 06, 2020
Anyone who has ever had to have transmission repair
Anyone who has ever had to have transmission repair done knows just how expensive this work can be. This is often the most expensive part of maintaining a vehicle and if and when Water-cooled Semi-hermetic Screw Compressor Rack they need to be fixed or replaced, it can often be because of an overheating issue. This can be a problem, but fortunately, there is a relatively low cost and easy solution for the issue of too much heat. The solution is called a cooler kit and it can make the life of this part so much longer than it may have been otherwise.
Transmission repair is often really expensive. A cooler kit is a particularly good choice for those who are driving a truck for work or recreation and frequently haul large loads or drive in inclement conditions. Hauling a big load will often cause an increase in temperature that burns off the fluid in the vehicle. As this stuff dissipates, it frequently causes a failure because of lack of lubrication and temperature regulation. One of the cooler kits will keep circulating the fluid in a way that keeps things running and reduces boil off.
Sometimes, a truck you purchase will already have a cooling system. Usually, this is what is meant by a towing package and it will be all set up to do some heavy hauling. If, on the other hand, the truck you have is not new or did not have the optional package, you may want to consider if a kit is the right solution for you. By having one installed, it is possible to do a whole lot more heavy hauling and in a variety of conditions. On the other hand, without appropriate protection, transmission repair will quickly be necessary and there is a big risk of failure of the whole unit. It is far better to err on the side of caution, if there is even a chance of using it for this sort of task.
Whether or not you plan on pursuing more industrial uses for a truck, a cooler kit can be beneficial. Keeping fluids at a low temperature can keep things running better and reduce wear. In the long run, this can translate to better life and smoother operation between having transmission repair done.
If transmission repair is not something you want to keep paying for or if there is a large amount of strain due to the usage of the vehicle you drive, considering an aftermarket system may be an excellent choice for reducing strain and saving money.
Transmission repair is often really expensive. A cooler kit is a particularly good choice for those who are driving a truck for work or recreation and frequently haul large loads or drive in inclement conditions. Hauling a big load will often cause an increase in temperature that burns off the fluid in the vehicle. As this stuff dissipates, it frequently causes a failure because of lack of lubrication and temperature regulation. One of the cooler kits will keep circulating the fluid in a way that keeps things running and reduces boil off.
Sometimes, a truck you purchase will already have a cooling system. Usually, this is what is meant by a towing package and it will be all set up to do some heavy hauling. If, on the other hand, the truck you have is not new or did not have the optional package, you may want to consider if a kit is the right solution for you. By having one installed, it is possible to do a whole lot more heavy hauling and in a variety of conditions. On the other hand, without appropriate protection, transmission repair will quickly be necessary and there is a big risk of failure of the whole unit. It is far better to err on the side of caution, if there is even a chance of using it for this sort of task.
Whether or not you plan on pursuing more industrial uses for a truck, a cooler kit can be beneficial. Keeping fluids at a low temperature can keep things running better and reduce wear. In the long run, this can translate to better life and smoother operation between having transmission repair done.
If transmission repair is not something you want to keep paying for or if there is a large amount of strain due to the usage of the vehicle you drive, considering an aftermarket system may be an excellent choice for reducing strain and saving money.
Posted by: refrigerations at
05:51 AM
| No Comments
| Add Comment
Post contains 436 words, total size 3 kb.
<< Page 1 of 1 >>
37kb generated in CPU 0.0331, elapsed 0.0855 seconds.
32 queries taking 0.0655 seconds, 56 records returned.
Powered by Minx 1.1.6c-pink.
32 queries taking 0.0655 seconds, 56 records returned.
Powered by Minx 1.1.6c-pink.
